Levels
Chemical product level by pressure
Uses pressure to monitor liquid fertilisers and other compatible products stored in tanks.
- Arrives pre-configured
- No building work, no plugs
From €599
I want it!
What it measures
Measures the pressure exerted by the liquid to calculate its height and available volume. The configuration accounts for the density of the stored product.
How it works
A probe made from compatible materials is installed in the tank. AgroMind converts the pressure reading using the configured density and geometry and displays inventory in real time.
What you gain
- Remote inventory without manual inspection
- Better purchasing and replenishment planning
- Alerts for emptying, overfilling or unexpected consumption
Installation
You install it yourself, with no building work and nothing to set up
The sensor arrives pre-configured from the factory. No trenches, no power supply and nothing to connect to the internet: you place it, fix it and it starts sending data.
Step by step
- 1
Protect yourself
Open the tank wearing gloves and goggles, as you would to handle the product.
- 2
Lower the probe
Feed it through the tank opening until it touches the bottom.
- 3
Secure the cable
Tie it at the opening with a cable tie so the probe doesn't move, then close the tank.
- 4
Nothing else
When you order, you tell us the product and the tank size: we choose compatible materials and it arrives set up.
That's it. From then on, readings reach the AgroMind app on their own.
What you'll see in the app
Readings reach AgroMind on their own. This is what you'll be able to follow:
Level and volume
Available inventory in the tank
Configured density
Accurate conversion for the stored product
Safety thresholds
Alerts for minimum, maximum or abnormal variation
Where you'll get the most out of it
Fertiliser tanks
Plan replenishment and track fertigation consumption
Treatment tanks
Monitor inventory without opening or manually inspecting the tank
Dosing facilities
Detect abnormal consumption and prevent dry running
How the data reaches your phone
The sensor works together with a module that collects and sends the readings.
- 01
The sensor
Measures continuously at the spot where you placed it.
- 02
AgroSense module
Collects readings from up to 6 sensors and sends them even where there is no Wi-Fi or 4G/5G coverage.
- 03
AgroMind app
Follow the trend from your phone, and we alert you on WhatsApp when something is out of the ordinary.
Technical sheet
- Protection
- Materials selected for the required chemical compatibility
- Setup
- Pre-configured from the factory
- Mounting
- Cable tie
- Connection
- AgroSense module, up to 6 sensors per module
- Coverage
- Works without Wi-Fi or 4G/5G coverage
- Alerts
- WhatsApp alerts and AgroMind app
- Origin
- Integrated and configured in Spain
- Warranty
- 2-year warranty
Frequently asked questions
Does it work with any chemical product?
Compatibility has to be checked first. That's why you tell us which product you store when you order, and we choose the right probe, seals and cable.
Does the product's density affect the reading?
Yes. A denser product exerts more pressure, so its density is configured to convert pressure into level and litres correctly.
Will it tell me when to restock?
Yes. You set the minimum level and we alert you on WhatsApp in time to place an order.
Does it detect unusual use or leaks?
Yes. If the level drops more than normal, for example with no fertigation running, you get an alert.
What if I switch products?
Tell us first: we need to check the materials are compatible and adjust the density so the reading stays correct.
Do I have to set anything up to get started?
No. It arrives pre-configured from the factory: you place it, fix it with a cable tie or its wall bracket, and readings start reaching the AgroMind app on their own.
Your tanks,
monitored from your phone
Tell us what you store and how many tanks or silos you have, with their dimensions. We'll send it set up and ready to install, so you never have to go and check again.
