Levels
Water level by pressure
Calculates the available level and volume in water tanks through continuous pressure measurement.
- Arrives pre-configured
- No building work, no plugs
From €499
I want it!
What it measures
Measures the hydrostatic pressure generated by the water column and converts it into height, fill percentage and available tank volume.
How it works
A submersible probe records pressure at the bottom of the tank. AgroMind applies the tank geometry to display the real level and generate configurable alerts.
What you gain
- Continuous remote reading of available water
- Warnings before the reserve runs out
- History of refills, consumption and possible leaks
Installation
You install it yourself, with no building work and nothing to set up
The sensor arrives pre-configured from the factory. No trenches, no power supply and nothing to connect to the internet: you place it, fix it and it starts sending data.
Step by step
- 1
Lower the probe
Feed it through the tank opening and let it go down until it touches the bottom.
- 2
Secure the cable
Tie it at the opening or to the ladder with a cable tie so the probe doesn't move.
- 3
Nothing else
When you order, you tell us the tank's shape and size, and it arrives set up to show the level and litres available.
That's it. From then on, readings reach the AgroMind app on their own.
What you'll see in the app
Readings reach AgroMind on their own. This is what you'll be able to follow:
Level
Height of the water column
Volume
Available quantity calculated from the tank geometry
Alerts
Warnings for minimum, maximum or abnormal changes
Where you'll get the most out of it
Irrigation tanks
Know the available reserve before starting a cycle
Reservoirs and cisterns
Detect unexpected drops or emptying risk
Livestock water supply
Prevent interruptions to drinkers and facilities
How the data reaches your phone
The sensor works together with a module that collects and sends the readings.
- 01
The sensor
Measures continuously at the spot where you placed it.
- 02
AgroSense module
Collects readings from up to 6 sensors and sends them even where there is no Wi-Fi or 4G/5G coverage.
- 03
AgroMind app
Follow the trend from your phone, and we alert you on WhatsApp when something is out of the ordinary.
Technical sheet
- Protection
- Submersible probe and cable designed for permanent use in water
- Setup
- Pre-configured from the factory
- Mounting
- Cable tie
- Connection
- AgroSense module, up to 6 sensors per module
- Coverage
- Works without Wi-Fi or 4G/5G coverage
- Alerts
- WhatsApp alerts and AgroMind app
- Origin
- Integrated and configured in Spain
- Warranty
- 2-year warranty
Frequently asked questions
How does it measure the level?
The probe rests on the bottom and measures the pressure of the water above it. From that it calculates the water height and, using the tank's dimensions, the litres available.
Does it work for tanks of any shape?
Yes. With the tank's shape and dimensions, which you give us when you order, it converts height into real volume, whether the tank is cylindrical, rectangular or another shape.
Does it work in reservoirs and wells?
Yes, as long as the probe can reach the bottom and the cable is well secured at the top.
Will it alert me to a leak?
Yes. If the level drops when it shouldn't, for example at night or with no irrigation scheduled, you get a WhatsApp alert.
Can I start the pump when the level drops?
Yes, with the AgroPump module. You can automate filling the tank or stop the pump before it runs dry.
Do I need Wi-Fi or mobile coverage where I install it?
No. The sensor is connected to an AgroSense module that sends the data on its own, even in plots or barns with no Wi-Fi or 4G/5G coverage.
Your tanks,
monitored from your phone
Tell us what you store and how many tanks or silos you have, with their dimensions. We'll send it set up and ready to install, so you never have to go and check again.
