Levels
Silo level
Remotely monitors the fill level of silos and solids tanks without contacting the stored product.
- Arrives pre-configured
- No building work, no plugs
From €650
I want it!
What it measures
Measures the distance to the material surface and converts it into fill percentage and estimated volume based on the silo geometry.
How it works
The sensor is installed at the top and measures without contact. AgroMind filters surface variations and calculates the available level.
What you gain
- Measurement without contact with the product
- Fewer manual inspections and less work at height
- Replenishment alerts based on actual inventory
Installation
You install it yourself, with no building work and nothing to set up
The sensor arrives pre-configured from the factory. No trenches, no power supply and nothing to connect to the internet: you place it, fix it and it starts sending data.
Step by step
- 1
Climb safely
Do it with the silo stopped and with the right safety measures for working at height.
- 2
Mount it on top
Fix it with its bracket on the top of the silo, pointing down with a clear view to the bottom.
- 3
Run the cable down
Route it along the silo structure, securing it with cable ties.
- 4
Nothing else
When you order, you tell us the silo's height and shape, and it arrives set up to show how much is left.
That's it. From then on, readings reach the AgroMind app on their own.
What you'll see in the app
Readings reach AgroMind on their own. This is what you'll be able to follow:
Distance
Separation between the sensor and product surface
Fill percentage
Level calculated against configured capacity
Estimated volume
Approximate inventory based on silo geometry
Where you'll get the most out of it
Feed silos
Plan orders and avoid running out of feed
Grain storage
Check inventory without climbing or opening the silo
Solid fertiliser tanks
Track consumption and schedule replenishment
How the data reaches your phone
The sensor works together with a module that collects and sends the readings.
- 01
The sensor
Measures continuously at the spot where you placed it.
- 02
AgroSense module
Collects readings from up to 6 sensors and sends them even where there is no Wi-Fi or 4G/5G coverage.
- 03
AgroMind app
Follow the trend from your phone, and we alert you on WhatsApp when something is out of the ordinary.
Technical sheet
- Protection
- Rugged housing for dusty environments
- Setup
- Pre-configured from the factory
- Mounting
- Wall bracket · Cable tie
- Connection
- AgroSense module, up to 6 sensors per module
- Coverage
- Works without Wi-Fi or 4G/5G coverage
- Alerts
- WhatsApp alerts and AgroMind app
- Origin
- Integrated and configured in Spain
- Warranty
- 2-year warranty
Frequently asked questions
How does it measure without touching the product?
It sits at the top of the silo and measures the distance to the surface of the grain or feed. Using the silo's height and shape, it calculates how much is left.
Does it work if the surface isn't flat?
Yes. Reading filtering reduces the effect of the cones and uneven surfaces that form during filling and emptying.
Which products can it measure?
Feed, cereal and other bulk solids stored in silos.
Is it affected by dust?
The housing is built for dusty environments. It's best not to place it directly above the filling inlet, where falling product would skew the reading.
Will it tell me when to reorder?
Yes. You set the level at which you want an alert and it reaches you on WhatsApp, with no need to climb the silo to check.
Do I need to run power or have a socket?
No. The AgroSense module runs on a battery and solar panel, so you can place it wherever you need without running cables or doing building work.
Your tanks,
monitored from your phone
Tell us what you store and how many tanks or silos you have, with their dimensions. We'll send it set up and ready to install, so you never have to go and check again.
