Agriculture
Weather station
Hygrometer, rain gauge and anemometer in one solution. Buy them individually or in the combination that best fits your plot.
- Arrives pre-configured
- No building work, no plugs
From €999
I want it!
What it measures
Measures the main climatic variables on the plot: ambient temperature and humidity (hygrometer), accumulated rainfall and intensity (rain gauge), and wind speed and direction (anemometer).
How it works
Modular system: you can install the full station or only the sensors you need for each farm's crop and needs. All modules send real-time data to the AgroMind platform.
What you gain
- Modular: pay only for what you need
- Climate data from your own plot, not interpolated from distant stations
- Foundation for predictive disease, irrigation and frost models
- Direct integration with AgroMind alerts and calculators
Installation
You install it yourself, with no building work and nothing to set up
The sensor arrives pre-configured from the factory. No trenches, no power supply and nothing to connect to the internet: you place it, fix it and it starts sending data.
Step by step
- 1
Find an open spot
Away from trees, buildings or walls that block wind or rain.
- 2
Fix it
Tie it to a post or mast with cable ties, or screw on the wall bracket and clip it in.
- 3
Keep it level
Check it stands upright and level so rain and wind are measured properly.
That's it. From then on, readings reach the AgroMind app on their own.
What you'll see in the app
Readings reach AgroMind on their own. This is what you'll be able to follow:
Ambient temperature
°C of the air at canopy or crop height
Relative humidity
% RH of the air; key indicator for fungal disease risk
Rainfall
mm accumulated per period and instantaneous intensity
Wind speed
Average m/s and gusts; reference for spray applications
Wind direction
Prevailing wind orientation on the plot
Where you'll get the most out of it
Fruit trees and vineyards
Disease models based on temperature, humidity and rainfall
Horticulture
Irrigation management adjusted to actual rainfall and evapotranspiration
Arable and extensive crops
Frost, hail and strong wind alerts
How the data reaches your phone
The sensor works together with a module that collects and sends the readings.
- 01
The sensor
Measures continuously at the spot where you placed it.
- 02
AgroSense module
Collects readings from up to 6 sensors and sends them even where there is no Wi-Fi or 4G/5G coverage.
- 03
AgroMind app
Follow the trend from your phone, and we alert you on WhatsApp when something is out of the ordinary.
Technical sheet
- Protection
- IP65 enclosure, resistant to rain, dust and UV radiation
- Setup
- Pre-configured from the factory
- Mounting
- Cable tie · Wall bracket
- Connection
- AgroSense module, up to 6 sensors per module
- Coverage
- Works without Wi-Fi or 4G/5G coverage
- Alerts
- WhatsApp alerts and AgroMind app
- Origin
- Made in Spain
- Warranty
- 2-year warranty
Frequently asked questions
What does the station measure?
Temperature, humidity, rainfall and wind on your own plot. It's modular: you can install the full station or just the hygrometer, rain gauge or anemometer.
Can I start with one part and expand later?
Yes. Start with what you need most, for example the rain gauge, and add the rest whenever you like without changing equipment.
Why isn't a weather app enough?
Apps estimate data from stations that may be many kilometres away. Yours measures what happens on your plot, and in storms or frosts the difference can be several degrees or litres.
Does it warn me about frost?
Yes. You set the temperature at which you want an alert and it reaches you on WhatsApp, even in the middle of the night, so you can act in time.
What is the anemometer for?
To pick wind-free hours for spraying, avoid drift, and get alerts about strong gusts that could damage the crop or greenhouses.
Do I need to run power or have a socket?
No. The AgroSense module runs on a battery and solar panel, so you can place it wherever you need without running cables or doing building work.
More sensors in agriculture
Multi-level capacitive soil moisture sensor
Measures volumetric soil moisture at several depths to show how water moves through the entire root profile.
View details
Single-level capacitive soil moisture sensor
Measures volumetric moisture at one specific depth for simple and precise irrigation control.
View details
Tensiometer (matric potential)
Measures matric potential: the effort the plant has to make to extract water from the soil.
View details Measure your soil,
irrigate with data
Tell us your crop, how many hectares you have and how you irrigate. We'll tell you how many sensors you need and where to place them so readings represent the whole plot.
